Share on:

Build Categories: | Tail Kit

Please read our Disclaimer.

1 2 

Vans RV-12iS Stabilator Construction - Upper and Lower Cable Attach Horns Assembly: Vlog #3 Vans RV-12iS Stabilator Construction - Upper and Lower Cable Attach Horns Assembly: Vlog #3
In this video I'm assembling and final riveting the Upper and Lower Cable Attach Horns Assembly for the stabilator of the RV-12iS.
Vans RV-12iS Horizontal Stabilizer Construction - Spar Cap Assembly: Vlog #2 Vans RV-12iS Horizontal Stabilizer Construction - Spar Cap Assembly: Vlog #2
In this video I'm assembling the Spar Cap for the horizontal stabilizer of the RV-12iS.
Vans RV-12iS Horizontal Stabilizer Construction: Vlog #1 Vans RV-12iS Horizontal Stabilizer Construction: Vlog #1
In this video I'm putting the Hinge Brackets together for the front spar or the horizontal stabilizer of the RV-12iS.
Van's Aircraft RV-12iS Trim Tab Construction Van's Aircraft RV-12iS Trim Tab Construction
In this video, we're building the Trim Tab Assembly for our RV-12iS.
Van's Aircraft RV-12iS Rudder Final Assembly - Part 3 Van's Aircraft RV-12iS Rudder Final Assembly - Part 3
In this video, we're finishing the Rudder for our RV-12iS.
RV-12iS - Rudder Spar Assembly -Part 2 - Plus Video Documentation Tip RV-12iS - Rudder Spar Assembly -Part 2 - Plus Video Documentation Tip
In this video, we're assembling the Rudder Spar and doing a test fit. Also, we show how we video our work, plus the equipment used.
RV-12iS Project Update - Vertical Stabilizer - Part 2 RV-12iS Project Update - Vertical Stabilizer - Part 2
In this video, we're finishing off the Vertical Stabilizer portion of the RV-12iS. Next, the Rudder!
Started work on the Vertical Stabilizer Started work on the Vertical Stabilizer
We started working on the vertical stabilizer and tried out "the wedge", using our new Milwaukee M12 cordless pop riveter. Very nice! The RV-12iS shown in the beginning of the video was built by high school students in McKinney, Texas.
Pop Rivet Wedge Tool and Rudder Hinges Pop Rivet Wedge Tool and Rudder Hinges
Started work on the RV-12 Vertical Stabilizer last night. Created the wedge tools for putting in Pop-rivets at an angle and assembled the hinge brackets for the back of the vertical stabilizer.
Organization Labeling for the Parts Cabinet Organization Labeling for the Parts Cabinet
Here's a quick tutorial on label making for a Parts Cabinet purchased from Lowes.

1 2 


RV Metal Aircraft Tools
Vans Aircraft RV Shirts
GoPro Garmin Virb shoot video from your airplane
Recreation Vehicle RV Discount on Supplies Loveseats
Rod Machado Pilot Training Course